Tilt-Up Academy > Certification Prep.
CATEGORY: Certification Prep.
Tilt-Up 101: Introductory Session
18 minutes | 0.5 PDH/LU
This seminar introduces the six modules consisting of the content for preparation to the ACI/TCA Tilt-Up Technician Certification Exam and the industry’s broad certification efforts as well as discussing the primary components contributing to the strategic and impressive growth of tilt-up c...
Tilt-Up 101: Module 1 - Safety | Planning | Scheduling
16 minutes | 0.5 PDH/LU
This session is part 1 of 6 modules discussing the construction process known as tilt-up or tilt wall, covering aspects important to the knowledge base for preparation to the ACI/TCA Tilt-Up Technician Certification Exam. This module covers safety communications and procedures, planning the tilt-...
Tilt-Up 101: Module 2 - Site Preparation | Structural Systems
11 minutes | 0.5 PDH/LU
This session is part 2 of 6 modules discussing the construction process known as tilt-up or tilt wall, covering aspects important to the knowledge base for preparation to the ACI/TCA Tilt-Up Technician Certification Exam. This module covers the initial steps involved in starting a tilt-up project...
Tilt-Up 101: Module 3 - Layout | Forming
13 minutes | 0.5 PDH/LU
This session is part 3 of 6 modules discussing the construction process known as tilt-up or tilt wall, covering aspects important to the knowledge base for preparation to the ACI/TCA Tilt-Up Technician Certification Exam. This module covers the steps to lay out and complete the forming of tilt-up...
Tilt-Up 101: Module 4 - Concrete | Placement
19 minutes | 0.5 PDH/LU
This session is part 4 of 6 modules discussing the construction process known as tilt-up or tilt wall, covering aspects important to the knowledge base for preparation to the ACI/TCA Tilt-Up Technician Certification Exam. This module covers the properties of concrete specific to tilt-up construct...
Tilt-Up 101: Module 5 - Erection | Bracing
13 minutes | 0.5 PDH/LU
This session is part 5 of 6 modules discussing the construction process known as tilt-up or tilt wall, covering aspects important to the knowledge base for preparation to the ACI/TCA Tilt-Up Technician Certification Exam. This module the processes of erecting and bracing tilt-up panels, widely co...
Tilt-Up 101: Module 6 - Panel & Building Finishes
17 minutes | 0.5 PDH/LU
This session is the final, part 6 of 6 modules discussing the construction process known as tilt-up or tilt wall, covering aspects important to the knowledge base for preparation to the ACI/TCA Tilt-Up Technician Certification Exam. This module detail many of the options for panel finishes and th...
Browse By Course Category
Newest Courses
Tips and Methods to Building Tilt-Up Sandwich Panels
54 minutes
With the increased demand for energy-efficient buildings comes the need for insulated tilt-up sandwich panels. This seminar aims to increase familiarity...
Achieving Net Zero Energy with Tilt Wall
50 minutes
We’ve moved on from a time when small consumer decisions like using compostable straws could be considered an adequate response to address climate...
Why is Slump Mandated in Project Specifications?
30 minutes
With the advances in concrete technology over the last 50 years, why is slump still being mandated in project specifications? This presentation will begin...
Better Materials, Better Designs, Better Ways to Build with Concrete
45 minutes
Design and construction professionals face significant challenges driven by increasing customer demands, rapidly changing material costs, strained supply...
Structural Engineering Challenges While Designing Tilt-Up Structures
53 minutes
This seminar will speak to of the challenges of structural design in tilt ups. Joining me in this presentation will include John Lawson, S.E. Together...
Building Psychological Safety to Address Mental Health
51 minutes
After two years, the stresses of a global pandemic have compounded the existing mental health challenges in the construction industry. According...
56 minutes
Needham DBS was called to investigate cracks on a building after years of issues. The building had a history of failed panel to slab connections and significant...
A Parametric Study of the New Diaphragm Design Force Methods
55 minutes
Since its introduction into U.S. building codes and standards, a single generally-accepted method has existed for determining seismic design forces on...
Safety Success through Proper Communication
42 minutes
This talk centers around the success Martin Concrete Construction has had with a bottom-up approach to safety culture. Specifically, this talk will discuss...
The Evolution of Bondbreaker: History, Best Practices, and Troubleshooting
35 minutes
This presentation will discuss the origins of tilt-up bondbreaker and its evolution over the years to the products we use today. The discussion will also...
Tilt-Up Concrete Association (TCA)
PO Box 204
402 1st Avenue SE
Mount Vernon, IA 52314
United States
Connect with Us!
About the Tilt-Up Concrete Association
Founded in 1986, the Tilt-Up Concrete Association (TCA) strives to improve the quality and acceptance of site-cast Tilt-Up construction - one of the fastest growing industries in the United States, combining the advantages of reasonable cost with low maintenance, durability, speed of construction and minimal capital investment. Over 10,000 buildings, enclosing more than 650 million square feet, are constructed each year using this construction method.
Site resources: Accessibility
All content copyright 2024 - Tilt-Up Concrete Association, unless noted otherwise.
Homepage slider image credits: (1) Ryan Goubty | Gensler, (2) Simon Menges | David Chipperfield Architects, (3) Bill Timmerman | richärd+bauer, (4) David Lauer | Semple Brown, (5) Matthew McFarland | Forum Studio.