Tilt-Up Concrete Association | 402 1st Ave SE, Mt. Vernon, Iowa 52314 | Phone: (319) 895-6911 | Member Login | Membership Renewal

 

Awards | TCA Tilt-Up Achievement

Gyrodata Global Headquarters

2013 TCA Tilt-Up Achievement Award - Office Division

Article tools: Coming soon!

Rather than follow the conventional tilt-wall design process, which is to design an exterior building shell based upon a simple grid and then insert the interior layout into that shell, for the Gyrodata project the interior layout of the building was created first and the exterior design was then molded to that layout. Following this process allowed the architect to accomplish several of the client's goals, including a specific architectural aesthetic, the need for natural lighting, a large clear-span atrium and curtain-wall glazing at the entry with very high ceilings and clear spanning manufacturing and storage areas.

The non-modular dimensions of the exterior meant that each tilt-up panel had to be a different size (width), which in turn created potential difficulties in the construction process, from forming panels to lifting. To maximize natural light while maintaining the desired building aesthetic, the architects included a continuous-appearing expanse of glazing across the second story of the tilt-wall facade. They recessed each panel leg and ran spandrel glass in front of each leg. On the first floor, punched openings in those same panels were used to create a recessed walkway around the perimeter of the front and sides of the first floor office area.

To maximize the amount of open area, the need for additional steel structure as wall support was eliminated by reversing each panel leg profile, using a thin, deep panel leg in lieu of the typical wide and shallow leg. This also sped up the construction timeline and helped bring the overall construction cost down. Because of the services that Gyrodata offers, there was a strong desire to have very large spans in the manufacturing and warehouse areas of this building. By using standard tilt-wall design with modest panel thicknesses (approximately 9.25 inches) and long spanning girders, designers achieved a full 120-foot clear span manufacturing space and bridge crane. This allowed Gyrodata flexibility in organizing the manufacturing areas, helping them maximize their production and profits.

This project is expected to earn LEED Gold certification.

Photos

Project Specifics

Project Wall Area
78,904 sq ft
(7,330 sq m)
Project Floor Area
155,000 sq ft
(14,400 sq m)
Project Footprint
115,000 sq ft
(10,684 sq m)
Tallest Panel
38 ft 7 in
(11.76 m)
Widest Panel
34 ft 1 in
(10.39 m)
Largest Panel
780 sq ft
(72.5 sq m)
Heaviest Panel
115,000 lbs
(52,163 kg)

Participating TCA Members

E E Reed Construction LPSustaining Member iconSustaining Member icon
Architect

About the TCA

Founded in 1986, the Tilt-Up Concrete Association (TCA) strives to improve the quality and acceptance of site-cast Tilt-Up construction, a method in which concrete wall panels are cast on-site and tilted into place. Tilt-Up construction is one of the fastest growing industries in the United States, combining the advantages of reasonable cost with low maintenance, durability, speed of construction and minimal capital investment. At least 10,000 buildings, enclosing more than 650 million square feet, are constructed each year using this construction method.

Follow Us

We use LinkedIn, Twitter and YouTube to disseminate information about the Tilt-Up industry, gain new members and inform developers, owners and architects about the benefits of using Tilt-Up.

Popular Links

The following bookmarks jump to the most popular destinations on this site.